Electricity is generated by generating stations and transmitted to load centers from where it is distributed to end consumers. These load centers are controlled by distribution utilities, and there is an inter-change of energy between different utilities connected to the grid. Consumers connected to the distribution utilities, though consuming active energy may or may not consume reactive energy. ...
Night-Time Reactive Power Management and Ferranti Effect Voltage Control in Long Solar PV Feeder Networks Quick Engineering Answer: In large-scale solar PV farms with extensive medium-voltage (MV 33kV/35kV) underground collector networks (often exceeding 50 km in cumulative length), zero-generation night-time conditions trigger the Ferranti Effect. The distributed shunt capacitance of lightly load...
YT ELECTRIC has been offering a comprehensive range of key components for Automatic Power factor correction (APFC) and power quality solutions for many years. The rapid development of industry and infrastructure resulted in the increased usage of power electronic loads which demands a highly dynamic response time for reactive power compensation. Conventional reactive power compensation only with p...
YTPQC-AHF Active Power Filter has been operating safely and stably in France YTPQC-AHF Active Power Harmonic Filter is an advanced power quality control equipment, which can compensate reactive power ,harmonics current and imbalance by setting parameters from friendly Human Machine Interface.This time French client purchased our Active Harmonic Filters mainly to improve Power Factor and mitigate h...
SMT mounter SMT (Surface Mount Technology) is an electronic component installation technology used to attach electronic components (such as resistors, capacitors, integrated circuits, etc.) to printed circuit boards (PCBs). Compared to traditional plug-in technology, SMT patches have higher density, faster production speed, and lower production costs. The working principle of SMT patches is...
YTPQC-AHF Active Harmonic Filter Based on the broad knowledge and experience in terms of solutions and applications in power quality, YT ELECTRIC has developed YTPQC-AHF Active Harmonic Filters. YTPQC Active Harmonic Filter is an active power correction solution to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is speci...
Static Var Generator (SVG) vs. Traditional Capacitor Banks: The Comprehensive Engineering & ROI Comparison Quick Engineering Answer: While traditional Automatic Power Factor Correction (APFC) capacitor banks rely on electromechanical contactors and discrete capacitor steps to supply static capacitive vars, a modern Static Var Generator (SVG) utilizes high-speed 3-level IGBT inverter technology...
The reactive power consumed by the transformer is generally about 10% to 15% of its rated capacity, and its no-load reactive power is about 1/3 of the full load. Therefore, in order to improve power factor (PF) of the power system, the transformer should not operate at no-load or in a long-term low-load operation state. Vigorously improving the power factor of transformers, reducing line losses, a...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
