Why is CT Selection the Core of AHF System Performance? The current transformer (CT), as the "sensing organ" of the active harmonic filter (AHF), directly affects the accuracy of harmonic detection and the dynamic response speed. If the CT is not properly selected, the following problems may occur: Failure of Harmonic Compensation: Low-frequency or high-frequency harmonics are missed in det...
1. Current Transformer (CT) A Current Transformer is an instrument transformer used to measure alternating current (AC) by stepping down high currents to a lower, measurable value. Key Functions: Current Measurement: Steps down high primary current (e.g., 1000A) to a standardized secondary current (e.g., 5A or 1A) for meters and relays. Isolation: Provides galvanic isolation be...
Active Harmonic Filters (AHFs) are widely used in buildings to mitigate harmonic distortion caused by non-linear loads, ensuring power quality, energy efficiency, and compliance with standards like IEEE 519 and IEC 61000-3-6. Here are key applications of AHFs in buildings: 1. Office Buildings & Commercial Complexes Loads: LED lighting, VFDs (HVAC systems), elevators, UPS systems...
The 4 quadrants of reactive power refer to the different combinations of active (real) power (P) and reactive power (Q) flow in an AC electrical system. These quadrants are defined based on whether power is being generated or consumed and whether the system is supplying or absorbing reactive power. Four Quadrants of Reactive Power: The quadrants are categorized based on th...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
