Introduction To Capacitors And Reactors Reactance includes inductive reactance and capacitive reactance, and reactor includes inductive reactance (inductor) and capacitive reactance (capacitor). Inductance has the function of blocking AC and blocking DC, that is, in the AC circuit, the characteristics of inductive reactance are used to pass low-frequency DC and block high-frequency AC. The capacit...
What is the power factor correction? Power factor correction (PFC) is a technique used to improve the power factor of an electrical system. Power factor is a measure of how effectively electrical power is being used. It is defined as the ratio of real power (measured in kilowatts, kW) used to perform work to the apparent power (measured in kilovolt-amperes, kVA) drawn from the power source. Power ...
what are the effects of harmonics on electrical systems In the intricate realm of electrical engineering, harmonics emerge as a subtle yet influential phenomenon that can significantly impact the efficiency, reliability, and safety of electrical systems. These unwanted frequencies, riding alongside the fundamental power waveform, can wreak havoc on various components and overall system perf...
What is the active power compensator? Active Power Compensator (APC) is an advanced power electronic device used to manage and optimize the flow of active power in electrical power systems. It helps to enhance power quality, improve voltage stability, and increase the overall efficiency of the power distribution network. APCs are particularly useful in applications where there are significant fluc...
How SVG compensation for leading reactive power? What kind of load is prone to generating leading power reactive power? Leading power factor conditions typically occur when a system has capacitive loads or a surplus of capacitive reactance over inductive reactance. Capacitive loads store energy in an electric field, unlike inductive loads that store energy in a magnetic field. When these lo...
Why Reactive power compensation is necessary on solar site? Backgaround With the development of the economy and the improvement of green energy awareness, more and more regions are using clean energy and installing a large number of solar power generation equipment. With the widespread use of photovoltaic power generation, many users have found that there are power adjustment fees, namely power fi...
kVAr and Amps in power quality Reactive Power (kVAR) Reactive power, measured in kilovolt-amperes reactive (kVAR), is the component of alternating current (AC) power that does not perform any actual work but is necessary for maintaining the voltage levels required for the active (real) power to do useful work. It is associated with the energy storage in inductive and capacitive elements of the pow...
Reasons of Neutral Current The neutral current is the current flowing through the neutral conductor in a multi-phase electrical system. In a perfectly balanced system, the sum of the currents in all phases should theoretically cancel each other out, resulting in zero neutral current. However, in practice, various factors cause current to flow in the neutral conductor. Reasons for Neutral Cur...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
