The combination of a Static VAR Generator (SVG) and Thyristor-Switched Capacitor (TSC) creates a high-performance hybrid reactive power compensation system. This setup leverages the fast dynamic response of the SVG with the cost-effective bulk compensation capability of TSC. How SVG + TSC Works SVG (Static VAR Generator) Uses a voltage-source converter (VSC) with IGBT...
Source-Grid-Load-Storage (SGLS) is a novel coordinated operational model for energy and power systems. It aims to build a flexible, efficient, and clean modern power system by integrating energy production, transmission, consumption, and storage. This concept represents a key solution to challenges such as large-scale renewable energy integration and dynamic power supply-demand balance amid t...
Why Capacitors Are the Preferred Choice for Reactive Power Compensation When it comes to low-voltage reactive power compensation, the conversation usually narrows down to two options: capacitor banks and Static Var Generators. Ask around, and you’ll likely hear one common reason why capacitors remain popular:“They’re cheaper.” That’s true—but the real answer goe...
In Poland, reactive power management is governed by grid codes and regulations set by the Transmission System Operator (PSE - Polskie Sieci Elektroenergetyczne) and Distribution System Operators (DSOs). The policies aim to ensure grid stability, minimize losses, and maintain efficient power flow. 1. Reactive Power Requirements in Poland A. General Power Factor (PF) Standards St...
Reactive power charges and power factor assessments are common in electricity billing, especially for industrial and commercial consumers. Here's a detailed explanation: 1. Reactive Power Charge Reactive power (measured in kVARh) is the power consumed by inductive or capacitive loads (e.g., motors, transformers, fluorescent lights) that do not perform actual work but are necessary for maintai...
Is Your Power System Suffering from Three-Phase Imbalance? In an ideal three-phase AC power system, the voltages and currents on all three phases (L1, L2, L3) are equal in magnitude and perfectly spaced 120 degrees apart. Three-phase imbalance occurs when the magnitudes of these voltages or currents deviate significantly from each other. This common power quality issue can stem from seve...
The 4 quadrants of reactive power refer to the different combinations of active (real) power (P) and reactive power (Q) flow in an AC electrical system. These quadrants are defined based on whether power is being generated or consumed and whether the system is supplying or absorbing reactive power. Four Quadrants of Reactive Power: The quadrants are categorized based on th...
From Shanghai’s skyscrapers to Africa’s solar farms, the YTPQC-SVG Static Var Generator is redefining power quality standards across continents. Its secret lies in a blend of rugged hardware and intelligent software, designed to thrive in the harshest environments while delivering lab-grade precision. At the core of the SVG is its TI DSP and FPGA-powered analytics...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
