Hospitals are places where reliable power distribution is needed to guarantee patient health and save lives. Continuity and reliability of power supply are extremely important. Automatic power restoration time of different healthcare venues is as follows: category 0 venues t≤15s; category 1 venues 0.5s≤t≤15s; and category 2 venues t≤0.5s. The Solution of YTPQC-APF Harmonics...
Introduction of YT APF YT Active Power Filter(APF) is connected in parallel with the power grid, which detects the harmonics in the power grid in real time, generates an inverse compensation current through the converter, and dynamically filters out the harmonics in the power grid. Its operation is not affected by the grid structure and load type, and will not resonate with the system, which perfe...
The basic principle of the intelligent Hybrid Static Var Generator is that the Static Var Generator, the capacitor bank and the reactor bank together form a reactive power compensation system. The static var generator performs fast and high-precision reactive power compensation. The Capacitor Banks performs slow and stepped reactive power compensation. The intelligent Reactive Power Hybrid Compens...
Mexico National Electric System Grid Code "Published in April 2016, the grid code is intended to explain and determine the requirements that market participants and stakeholders must follow, as defined by CRE's role in ensuring reliability in energy reform." National Association of Public Service Regulatory Commissioners (NARUC). The technical requirements of the Network Cod...
1.Introduction of YT Hybrid Static Var Generator System Static Var Generator + Capacitors Hybrid intelligent Reactive Power Compensation device adopts the configuration scheme combining static var generator and switching capacitor/reactor. According to the actual needs of users ,it can implement different reactive power compensation schemes to achieve the best combination of price and effec...
Power Factor Correctioni(PFC) Power factor correction (PFC) aims to improve power factor, and therefore power quality. It reduces the load on the electrical distribution system, increases energy efficiency and reduces electricity costs. It also decreases the likelihood of instability and failure of equipment. Power factor correction is obtained via the connection of capacitors(or Static Var...
Characteristics of reactive energy Reactive energy is not consumed, it is not useful for the system. Although it does not produce useful work, it is necessary to neutralize or compensate it. The reactive energy is measured in kVArh (Kilo volt-amp reactive hour). Reactive energy is created in devices or machinery that works with motors or transformers powered by the alternating current that reaches...
Background Hongsan Industrial Park is a professional functional zone characterized by rubber industry, and the electric loads are mainly rubber cutters, open mills and internal mixers. The electric power consumption of the motor in the internal mixer system accounts for about 70% of the total electric power consumption in the rubber industry. Because of the high power of the internal mixer an...