Characteristics of reactive energy Reactive energy is not consumed, it is not useful for the system. Although it does not produce useful work, it is necessary to neutralize or compensate it. The reactive energy is measured in kVArh (Kilo volt-amp reactive hour). Reactive energy is created in devices or machinery that works with motors or transformers powered by the alternating current that reaches...
Background Hankook is a world famous tire brand from South Korea. Since entering China in 1996, the company has invested more than 600 million US dollars to establish a complete production, logistics and sales network system. It is a high-tech factory with an annual output of 10 million tires in Jiaxing, Zhejiang. Due to the low power factor in the on-site distribution system, the company urgently...
Power Factor Correction Power Factor Correction improves the phase angle between the supply voltage and current while the real power consumption in watts remains the same, because as we have seen a pure reactance does not consume any real power. Adding an impedance in the form of capacitve reactance in parallel with the coil above will decrease Θ and thus increases the power f...
Does Active Harmonic Filter can saving energy? YTPQC-AHF Active Harmonic Filter can save energy by reducing the amount of harmonic distortion in a power system. Harmonic distortion can cause power losses and reduce the efficiency of electrical equipment, so reducing it can help to save energy. How does active harmonic filter save energy？ YTPQC-AHF Active Harmonic filters can save energy by ...
Electricity is generated by generating stations and transmitted to load centers from where it is distributed to end consumers. These load centers are controlled by distribution utilities, and there is an inter-change of energy between different utilities connected to the grid. Consumers connected to the distribution utilities, though consuming active energy may or may not consume reactive energy. ...
Power factor is a measurement of electrical system efficiency. Many utilities have a power factor penalty built into their rate structure to penalize users with a low power factor reading in their electrical system. To improve the power factor, the most common solution is to install a capacitor banks, But Static Var Generator is the best power factor correction product. There are 3 kinds of...
Ultra-high harmonic detection in distribution networks relies on advanced technologies designed to measure and analyze harmonics beyond the conventional limits. Here are some key technologies used for ultra-high harmonic detection: Wideband Spectrum Analysis: This technology involves using wideband spectrum analyzers capable of analyzing frequencies well beyond the conventional range to detect and...
Power quality management in distributed photovoltaic (PV) refers to the measures and strategies employed to ensure the reliable and efficient operation of PV systems while maintaining the quality of electrical power supplied to the grid. Here are some key aspects of power quality management in distributed photovoltaic: Voltage Regulation: PV systems can introduce voltage fluctuations due to the in...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
