The basic principle of the intelligent Hybrid Static Var Generator is that the Static Var Generator, the capacitor bank and the reactor bank together form a reactive power compensation system. The static var generator performs fast and high-precision reactive power compensation. The Capacitor Banks performs slow and stepped reactive power compensation. The intelligent Reactive Power Hybrid Compens...
Mexico National Electric System Grid Code "Published in April 2016, the grid code is intended to explain and determine the requirements that market participants and stakeholders must follow, as defined by CRE's role in ensuring reliability in energy reform." National Association of Public Service Regulatory Commissioners (NARUC). The technical requirements of the Network Cod...
1.Introduction of YT Hybrid Static Var Generator System Static Var Generator + Capacitors Hybrid intelligent Reactive Power Compensation device adopts the configuration scheme combining static var generator and switching capacitor/reactor. According to the actual needs of users ,it can implement different reactive power compensation schemes to achieve the best combination of price and effec...
Power Factor Correctioni(PFC) Power factor correction (PFC) aims to improve power factor, and therefore power quality. It reduces the load on the electrical distribution system, increases energy efficiency and reduces electricity costs. It also decreases the likelihood of instability and failure of equipment. Power factor correction is obtained via the connection of capacitors(or Static Var...
Characteristics of reactive energy Reactive energy is not consumed, it is not useful for the system. Although it does not produce useful work, it is necessary to neutralize or compensate it. The reactive energy is measured in kVArh (Kilo volt-amp reactive hour). Reactive energy is created in devices or machinery that works with motors or transformers powered by the alternating current that reaches...
The inductor is a component that can convert electrical energy into magnetic energy and store it. The structure of the inductor is similar to that of a transformer, but there is only one winding, which only hinders the change of current. If the inductor is in the state of no current passing through, when the circuit is connected It will try to hinder the flow of current through it. If the inductor...
Power Factor Correction Power Factor Correction improves the phase angle between the supply voltage and current while the real power consumption in watts remains the same, because as we have seen a pure reactance does not consume any real power. Adding an impedance in the form of capacitve reactance in parallel with the coil above will decrease Θ and thus increases the power f...
Electricity is a big part of our day, powering all the tech we use. There are two main types of electricity users, or "loads," called linear and non-linear. This just means they use electricity from the power supply in different ways. This distinction affects everything from power efficiency to the longevity of devices. Categories of Electrical Loads: · Inductive Loads: Characterized b...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
